Beyma 10XC25

Beyma 10XC25 Full range coaxial speaker - 250W AES - 10" bass + 1" driver This 10" coaxial loudspeaker has been designed in order to achieve an excellent compromise between power handling, efficiency and weight. Its low frequency unit features a 2.5" (62.4 mm) aluminium voice coil which handles 250 w AES, while the high frequency unit features a 1.75” (44.4 mm) edgewound aluminium ribbon voice coil which yields a 40 w AES power handling. The combination of these two drivers give as a result an extended and linear frequency response with low distortion and high efficiency. Moreover, this dual loudspeaker has a relatively low weight (5.1 kg.) that makes easier to fit it with a compact bass-reflex enclosure. Key features - 10" bass loudspeaker and 1” exit compression driver combination - High power handling: 250 w AES (L.F. unit) and 40 w AES (H.F. unit) - Extended and linear frequency response (55-20000 Hz) - High sensitivity: 98 dB (L.F. unit) and 105 dB (H.F. unit) - Low weight (neodymium compression driver) - Bass loudspeaker designed for compact bass-reflex cabinets Technical Specifications L.F. Unit Nominal Diameter 250 mm. 10 in. Rated Impedance 8 ohms. Minimum impedance 7.3 ohms. Power capacity 250 w AES Program power 500 w Sensitivity 98 dB 2.83v @ 1m @ 2p Frequency Range 55-8000 Hz Recom. enclosure vol. 20 / 70 l 0.7 / 2.6 ft.3 Voice coil diameter 62.4 mm. 2.5 in. Magnetic assembly weight 4.3 kg. 9.46 lb. BL factor 12.5 N/A Moving mass 0.028 kg. Voice coil length 17 mm. Air gap height 7 mm. X damage 24 mm. H.F. Unit Rated impedance 16 ohms. Minimum impedance 10.9 ohms.@ 4.5 kHz Power capacity 40 w AES above 1.5 kHz Frequency Range 0.7 - 20 kHz Sensitivity 105 dB Voice coil diameter 44.4 mm. 1.75 in. Flux density 1.8 T BL Factor 10.5 N/A Dispersion 90º conical